Wednesday, December 7, 2011

Gas Furnace Repair

!±8± Gas Furnace Repair

To fix household things that break, you need to know how it works, what can go wrong, how to identify the problem, as well as the steps to fixing it. Here's what you need to know about gas furnace repairs.

How Does It Work?

Natural or propane gas from an outside source is piped to the furnace where it is burned to produce heat. Usually a fan-driven forced-air distribution system blows the warmed air through ducts that vent into the various rooms of the house. Older gas furnaces use a standing-pilot ignition. Maintenance involves turning off the pilot each spring and relighting it each fall. Newer, more efficient gas furnaces use an electric spark to light the gas as necessary.

What Can Go Wrong?

Most gas furnaces are quite reliable. What are the symptoms of problems? The furnace may not produce heat or may not produce enough heat. The pilot light may go out repeatedly or refuse to light. The thermocouple may be faulty. The pilot may light but not ignite the burner. The furnace may be noisy. There are some maintenance and a few minor repairs that you can make. However, major service should be left to a trained technician.

Fix-It Tip

To minimize problems with your gas furnace, take time each month to check the air filter and clean or replace it if necessary. Once a year, clean the blower blades, lubricate the blower motor, and inspect the belt.

How Can I Identify the Problem?

If there is no heat, check the electrical service panel for a burned fuse or tripped breaker. Relight the pilot light (see below).

If there is not enough heat, adjust the burner air shutter (see below); and clean the burner ports (see below).

If the pilot light does not light or does not stay lit, clean the pilot orifice carefully with a toothpick, test the thermocouple and replace it if it is faulty (see below).

If the flame flickers, adjust the pilot (see below).

If there is an exploding sound when the burner ignites, adjust the pilot to a higher setting and clean the pilot orifice and the burner ports.

If the burner takes more than a few seconds to ignite, clean the pilot orifice and adjust the pilot light.

If the burner flame is uneven, clean the burner ports. If the burner flame is very yellow, clean the burner; open vents in the furnace room to provide more air; adjust the burner air shutter.

If the furnace makes a rumbling noise when the burners are off, clean the burner and adjust the burner air shutter.

If the air is too dry, wash or replace the evaporator pad if you have a humidifier; test the humidistat; and adjust the water-level float to raise the water level.

If some rooms are too cool and others too warm, the distribution system may require balancing. Refer to the Forced-Air Distribution Fix-It Guide at FixItClub.com

Fix-It Tip

Be sure your filter is the right size for your furnace.

What Parts, Materials, and Tools Do I Need?

Some replacement parts for gas furnaces are interchangeable (filters, fasteners) and available at your local hardware store. Others, such as burners and controls, must be purchased from the manufacturer or aftermarket supplier or through a heating equipment supplier listed in your local telephone book.

The primary tools you will need for fixing a gas furnace include these:

* Screwdrivers

* Wrenches

* Pliers

* Wire brush

* Multimeter

What Are the Steps to Fixing It?

To light the pilot on a standing-pilot (always on) ignition system, follow the lighting instructions located near the control. Otherwise, try these steps:

Light the pilot:

1. Press and hold the pilot control knob to start the pilot. Set the control knob to the pilot position. Hold a long match under the pilot gas port.

2. Press the control knob; the pilot should light. Hold the control knob down until the flame is burning brightly (about 30 seconds). Release pressure on the knob, and turn it to the on position.

3. If the pilot goes out when you release the control knob, try relighting, holding the control knob down longer. If the pilot again goes out, check the thermocouple (below).

Adjust the pilot:

1. Remove any cap covering the pilot adjusting screw on a combination control.

2. Turn the adjusting screw counterclockwise to increase the flame or clockwise to decrease it. It is correctly adjusted when the flame envelops the thermocouple bulb by 1/2 inch and appears dark blue with a small yellow tip.

Test and replace a thermocouple:

1. Hold the control knob to pilot and light the pilot as above.

2. Unscrew the thermocouple fitting with an open-ended wrench.

3. Set a multimeter to the DVC (lowest voltage) scale.

4. Clip one multimeter lead to the end of the thermocouple tube nearest the pilot and the other lead to the fitting on the other end of the tube.

5. If the multimeter shows a reading besides zero, the thermocouple is functioning. Replace the thermocouple tube.

6. If there is no reading, you will need to clean or replace the thermocouple following steps 7 through 11.

7. Release the control knob and shut off the main gas valve on the gas-supply pipe that leads into the burner. Shut off power to the burner at the electrical service panel .

8. Remove the thermocouple from its mounting bracket.

9. Wipe the combination control clean and install a new thermocouple, tightening it by hand, then give it a one-quarter turn with a wrench.

10. Insert the thermocouple into the pilot bracket, being careful to not crimp the tubing.

11. Turn on power to the furnace and relight the pilot (above).


Gas Furnace Repair

Discount Insinkerator Spacesaver

Friday, December 2, 2011

Mr. Heater MH125FAV 125,000-BTU Forced-Air Propane Heater

!±8± Mr. Heater MH125FAV 125,000-BTU Forced-Air Propane Heater


Rate : | Price : $181.28 | Post Date : Dec 02, 2011 10:19:14
Usually ships in 24 hours

Portable propane heater offers efficient temporary heat for construction sites, agricultural buildings, industrial workspaces, remodeling jobs and more. Features a high-output fan to maximize air circulation, 10-ft. hose and regulator. High-temperature limit switch/flame safety. Compact and lightweight with attached carrying handle. Thermostat not included. Uses 40-lb. tank (not included). CSA certified. Category Type: Convection heat, Product Style: Portable / outdoor, Vent-Free: Quality air flow required, Heating Capability (sq. ft.): 3,000, Heat Settings: Low, medium, and high, BTU Output: 125,000, Clearance from Corner (in.): 24, Clearance from Rear Wall (in.): 24, Clearance from Side Wall (in.): 24, Thermostat Included: No, Blower Included: Yes, Blower (CFM): 350, Fuel Consumption (gal./hr.): 11 hours on a 40-lb. tank, Igniter: Piezo push-button ignition, Oxygen Depletion Sensor: Yes, Remote Included: No

Dunlop Rotovibe Sale

Wednesday, November 16, 2011

Mr. Heater 30,000 BTU Propane Blue Flame Vent Free Heater, VF30KBLUELP

!±8± Mr. Heater 30,000 BTU Propane Blue Flame Vent Free Heater, VF30KBLUELP


Rate : | Price : $221.65 | Post Date : Nov 16, 2011 02:19:05
Usually ships in 24 hours

The VF30KBLUELP is a propane fired, vent free, blue flame heater that produces 30,000 BTU's of efficient, comfortable heat. This safe, clean-burning heater has a five setting heat control, low oxygen shut off sensor and burns 99.9% efficient. This unit does not require electricity and is easily installed as a wall mount unit or as a free standing unit with the included feet kit. Battery powered spark igniter (AA battery included), and blower fan for increased air circulation. This CSA certified heater will heat up to 600 square feet and comes with a limited two year warranty.

Ikea Gift Certificate Best Cheap Yo Gabba Gabba Pillows

Saturday, November 5, 2011

DuraHeat Portable Kerosene Heaters

!±8± DuraHeat Portable Kerosene Heaters

DuraHeat kerosene heaters are marketed and sold by World Marketing of America that was founded in 1982. In the initial stages, the company was known for manufacturing and supplying high quality after-market kerosene heater replacement wicks that were made to OEM specifications. Gradually the company started manufacturing the complete line of DuraHeat kerosene heaters along with its replacement wicks as well as accessories and as-of-now has been considered as the best "value choice" in the kerosene heater market.

This U.L listed heater is manufactured in an ISO9001 facility and is made of the highest quality to meet any of your heating needs. Home-owners generally prefer these units as it is made of high quality material provide perfect service and are good value for the money. These units provide an inexpensive way of providing warmth and are best suited for individuals who'd like to reduce their home heating costs or heat up a large area.

Some of the salient features of DuraHeat heaters include automatic tip over safety switch, one touch ignition and automatic reset shut off. The entire design of the modern convection style kerosene heater is user-friendly and is provided with a salient features which allows automatic wick rising without first "resetting" the emergency shut off. These units require no outside power source and are easily portable.

All you have to do is simply keep the unit where you need it and within a few moments you will definitely notice instant heat. These units are extremely well suited for areas where there are winter power outages or where cold weather emergencies are a regular feature. Apart from being a top quality product, these units are also portable which makes them easy to carry and maneuver wherever required.

DuraHeat Portable Kerosene Heaters
DH2304 23, 000 BTU Convection Kerosene Heater - This unit is specially designed for providing its users with a cost-effective way of warming up to 1,000 sq. ft area. It is one of the most preferred brands that help in considerably reducing your total home heating costs. The heat that is generated from this unit can easily be adjusted with the help of a simple dial control and it also features an auto-shutoff which is provided for safety reasons. In places where there are regular power cuts, this unit is best suited as it runs without electricity and provides an excellent source of heat and light in case of emergencies.

DH1050 10,500 BTU Radiant and Convection Heater - This is one of the latest and newly designed units that provide an inexpensive solution to your home heating needs. It is compact, portable and lightweight and features an Omni radiant burner that is designed to provide both convection as well as radiant heat. This product delivers high output at very low cost.

DH1011 10,000 BTU Radiant Kerosene Heater - This unit is designed to provide a new look to the radiant kerosene heating. It features a new and improved design with rounded corners, extra wide heating area as well as an attractive sculpted front panel design. It is made from high quality stainless steel and also features an easy lift out fuel tank for refueling.


DuraHeat Portable Kerosene Heaters

Zoll Aeds Order

Saturday, October 22, 2011

Mr. Heater 80,000 BTU Propane Convection Heater #MH80CV

!±8±Mr. Heater 80,000 BTU Propane Convection Heater #MH80CV

Brand : Mr. Heater
Rate :
Price : $99.99
Post Date : Oct 22, 2011 08:00:21
Usually ships in 24 hours



MR. HEATER PORTABLE PROPANE HEATER *Heats approximately 1900 sq. ft. *Runs up to 14 hours on 20 lb. tank (low setting) *Standing pilot for increased safety *Convenction *Piezo push button ignitor *Two stage chamber for reduced ship cube/retail space *"Instalock" chamber for easy assembly *10 foot hose and regulator included *CSA certified

Restonic Mattress Reviews Top Quality Usp Oxyelite Pro Buy Now


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。







Sponsor Links